ONEUP Chain Guide - ISCG05 - V2

Member Saves $14.00
filler

Color: Black
Price:
Sale price$87.00 Regular price Original Price ($101.00)

Description

Eliminate dropped chains?forever with the new OneUp Components Guide.

As the trend for lower and slacker bikes continues, 'Little bikes' are getting more and more capable everyday. Revised for 2019 the OneUp Guide uses simple, one tool installation and adjustment as well as an all new tool less flip

At?only 40g?the OneUp Chain Guide?weighs less than a sip of water.

WHY DO I NEED A?GUIDE?AND A NARROW WIDE CHAINRING?

NW rings are awesome, but they're not perfect and every once in a while you can drop a?chain?while riding. On a social ride this means getting dropped by your friends. But when racing an Enduro a dropped?chain?can cost you the podium, which is why almost every EWS pro runs both a?chainguide?and narrow wide chainring.

FEATURES
  • Tool less upper guide flip
  • Install without removing your crank
  • Single tool install and adjustment (4mm hex)
  • Boost compatible
  • Oval Compatible
  • Black Stainless Steel hardware
  • Patented US 10,053,188 Other Patents Pending

SPECS

  • Weight:?40g
  • Capacity:26-38T
  • Chainline:7.5mm adjustment
  • Mount:?ISCG05
  • Color:Black top guide piece included
  • Material:7075 aluminum, top guide glass reinforced thermoplastic


GUIDE SETUP INSTRUCTIONS

  1. Remove top guide?by removing the front top guide nut with a 4mm hex (never adjust the rear T25 bolt).
  2. Set slider in the highest position.(inserted a 4mm into the hole on the bottom left of the top device with the chain link symbol and backed it out anti-clockwise).
  3. Hold backplate directly against ISCG05 tabs.Check for clearance between the back side of the guide and the bike frame (use included 2.5mm spacers if necessary to space the backplate away from the frame).
  4. Rotate backplate until?slider adjustment bolt is directly above the crank axle and torque bolts to 5Nm
  5. With crankset and chain installed, use spacer shim block to measure clearance between back plate and chain
  6. Determine the corresponding number of chainline shims required
  7. If more than 5 shims are required, install the supplied 2.5mm washers behind the backplate and return to step 2
  8. Assemble top guide with spacers and tighten bolt to 3Nm
  9. Insert a 4mm hex through the hole in the inner top guide, loosen height adjustment bolt and lower the tool onto the chain. Torque to 3Nm to set height

Payment & Security

Apple Pay Google Pay Mastercard PayPal Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Member Saves $21.00
ONEUP BASH GUIDE - ISCG05 - V2ONEUP BASH GUIDE - ISCG05 - V2
Sale price$139.00 Regular price$160.00
ONEUP BASH GUIDE - ISCG05 - V2ONEUP Reviews
Member Saves $11.00
ONEUP CHAIN RINGS Switch - 10/11/12 SP RingsONEUP CHAIN RINGS Switch - 10/11/12 SP Rings
Sale priceFrom $72.00 Regular price$83.00
ONEUP CHAIN RINGS Switch - 10/11/12 SP RingsONEUP Reviews
Member Saves $18.00
SRAM GX Eagle DUB CranksetSRAM GX Eagle DUB Crankset
Sale price$207.00 Regular price$225.00
SRAM GX Eagle DUB CranksetSRAM Reviews
Member Saves $3.00
ONEUP Chain Guide Top Kit - V2ONEUP Chain Guide Top Kit - V2
Sale price$26.00 Regular price$29.00
ONEUP Chain Guide Top Kit - V2ONEUP Reviews
Member Saves $16.00
ONEUP EDC V2 ToolONEUP EDC V2 Tool
Sale price$101.00 Regular price$117.00
ONEUP EDC V2 ToolONEUP Reviews
Member Saves $9.00
ONEUP EDC Threadless CarrierONEUP EDC Threadless Carrier
Sale priceFrom $60.00 Regular price$69.00
ONEUP EDC Threadless CarrierONEUP Reviews

Recently viewed